Ensuring Stability by Tightening Screws

7:20

12:06

17.1K views

At 7:20 in

Door Deckers | Painting Doors Laying Flat

Watch on YouTube

What happens here

To ensure maximum stability when stacking multiple painted doors, it is recommended to use an impact drill to tighten the screws for the Door Deckers. This prevents any 'play' or rocking motion in the individual Door Deckers. When doors are stacked high (up to 8-10 doors), even a small amount of play can lead to significant instability at the top of the stack. By tightening the Door Deckers thoroughly until the gap is completely closed and the device is snug, you eliminate this play and create a much more secure and stable drying system.

Goal: This step advises using an impact drill to securely tighten the Door Deckers to the door, eliminating any play that could lead to an unstable stack of doors during drying.

Tools and materials

Impact Drill
Mr. Speed's Door Deckers

What they say

(975 characters)

Hide

some of um the door Deckers you know I wasn't like consciously tighten them up very tight and um they did have kind of a little bit of play and rock in them and they would kind of just like rock back and forth and as you begin to stack the door Deckers up higher and higher the whole stack you kind of like would wobble back and forth just a little bit and that's because there was a little bit of play and the Deckers themselves were tight enough to the door now when applying the door Deckers I would recommend using an impact drill draw them in right um to where they get that Gap is completely closed and let it just um impact a couple times so they're tight and snug so when you stack them up cuz you can stack them you know up to 8 to 10 doors high and if you start to get them up high enough if there's a little bit of play there's going to be a lot more play at the top so eliminate play by um uh tightening up your door Deckers tight enough there are a lot of people

Auto-generated from the video audio.