Install Wall Support Cleats and Legs
At 7:23 in
DIY Modern Bathroom Remodel
What happens here
First, use a stud finder to locate and mark the wall studs where the vanity will be mounted. Since the stud alignment was problematic and a floating vanity was desired, an alternative support system was devised. This involved installing horizontal wooden cleats (1x1.5 inch strips) along the wall at the desired vanity height. These cleats were securely screwed into the available studs. Due to the drain pipe's position and lack of direct stud support in some areas, additional wooden legs were created. These legs were stained to match the vanity, fitted with mounting plates, and screwed into the bottom of the vanity for extra stability.
Goal: Create a robust and stable mounting foundation for the floating vanity.
Tools and materials
- Cordless Drill
- Level
- Pencil
- Stud Finder
- Tape Measure
- Wood Screws
- 1x1.5 inch Wooden Cleats
- Mounting Plates
- Wooden Legs
What they say
(1,121 characters)Hide
What they say
(1,121 characters)Auto-generated from the video audio.