Skip to main content

Prepare the Tire Repair Kit

3:20
8:06
14K views

At 3:20 in

DIY Flat Tire Fix..Quick and Easy Tutorial

What happens here

Take out the reamer tool (a file-like tool) and the plug insertion tool (a handle with a needle-like end with a gap). Select one of the sticky rubber plugs from the kit and thread it through the eye of the plug insertion tool, positioning it smack in the middle so there's about a 50/50 split on each side.

Goal: Open the tire repair kit, identify the reamer tool and plug insertion tool, and load a sticky rubber plug onto the insertion tool.

Tools and materials

  • 4-Way Valve Tool
  • Plug Insertion Tool
  • Reamer Tool
  • Slime Tire Tackle Tire Repair Kit
  • Rubber Tire Plug Slime

What they say

Hide

to act pretty quickly here i'm going to post links to all this stuff down the video description but this is a an indispensable tool to have around your house this is a tire tackle slime brand tire tackle and it's simply a nine piece kit for repairing the tire so first tool we're gonna use we're gonna get our screw out we're gonna take this little uh rough it's kind of like a file and we're gonna go in there we're gonna file that surface we're going to make it nice and rough then next thing we're going to do is we're going to take out one of these plugs these little plugs are sticky icky sticky so we'll take these little sticky plugs and we'll put them in the plugger and that's the plugger we'll show you how that loads up these little plugs go right into the sticky icky now there are a few things in here that you might want might not want might not need but there's a tire pressure gauge for when you get done you can check your tire pressure pretty simple stuff we're going to go ahead and pre-load this handle right here before we pull that screw out so quickly we'll show you how to load up the tool that has the plug it's i call it a plugger i don't know what you call it you guys let me know down there in the uh in the video description so we'll take this little rubber piece and again it's fairly sticky and we're going to thread it through and you'll see this threa this head has a gap in there so when we pull it out it's going to pull right through the plug so we'll get our plug in there we'll just kind of feed it through the head of the needle once it gets in there it's fairly easy we'll get it right smack in the middle or as best as we possibly can like that about a 50 50 split right there we're going to be jabbing this into that hole so we're going to take it with our fist see how it's designed we're going to go lamb and smack and we're going to pull it out basically we won't go all the way in we're just going to go about that deep i'll show you next step we got to do we got to take this screw all the way out and you're going to hear the air fizzling out there's a couple more tools that i recommend you get

Auto-generated from the video audio.