Skip to main content
Stesso

Introduction and Tools Overview

0:02
14:30
108.2K views

At 0:02 in

DIY Cleaning & repacking a Airless spray gun. Airless Spray Gun Repairs. Titan Wagner Sprayer.

Watch on YouTube

What happens here

The video begins with an introduction to the task: disassembling, cleaning, and reassembling a Graco Contractor gun. The presenter then lays out and identifies the necessary tools for the job, which include a crescent wrench, a 5/8 inch box wrench, a small flat-head screwdriver (or eyeglass screwdriver), and a 9/32 inch socket.

Goal: Understand the project and gather all required tools.

Tools and materials

  • 5/8 inch Box Wrench — Removing specific nuts on the gun's fluid section
  • 9/32 inch Socket — Removing the pin that holds the internal packings
  • Crescent Wrench — Loosening and tightening various nuts and bolts on the gun
  • Graco Contractor Paint Gun Graco — The main item to be disassembled, cleaned, and reassembled
  • Small Flat-Head Screwdriver — Removing O-rings from the internal packings

What they say

Hide

you how we take a gray coat contractor gun, remove the internal packings, clean them, and put the gun back together again. And in this task, you're going to need several items. You're going to need a crescent wrench. You'll need a 5/8 in box wrench. I use a little tiny screwdriver to remove the O-rings from the internal packings that clean them. And then I also use a 932 socket to actually remove the pin that actually holds the internal packings inside the gun. And to start off this

Auto-generated from the video audio.