Skip to main content
Stesso

Cure and Scrape Excess Filler

0:05
1:03
47.9K views

At 0:05 in

Create your own seamless garage floor. Watch our DIY epoxy floor course. #epoxy @RustOleumBrands

Watch on YouTube

What happens here

After the Polylex 93 self-leveling filler has been applied, it must be allowed to cure for approximately "45 minutes to an hour". Once sufficiently cured but still workable, a MARSHALLTOWN floor scraper is used to remove any excess material that has expanded or settled above the concrete surface. The video demonstrates the scraper effectively lifting long, continuous strips of the cured filler, resulting in a smooth and flush surface, vital for a "seamless epoxy floor". The narrator emphasizes how "easy it cuts".

Goal: Create a flush, level surface by removing cured excess joint filler.

Tools and materials

  • Floor scraper MARSHALLTOWN — Removing excess cured Polylex 93 filler from the concrete surface
  • Protective gloves MAXIFLEX — Protecting hands during scraping

What they say

Hide

This is my self leveling polyflex 93 right here. Just board it in, bend it in, wait 45 minutes to an hour. Give yourself a floor scraper, scrape it off. Now you have yourself a seamless epoxy floor. Look it out, look how easy it cuts. Check that out, polyflex 93.

Auto-generated from the video audio.