Skip to main content
Stesso

Pour, Level, and Finish Concrete

2:36
4:54
1.2M views

At 2:36 in

Concrete basics for Beginners from top to bottom, ground prep, rebar, sealing & protecting

Watch on YouTube

What happens here

Begin pouring the wet concrete over the prepared and reinforced base. As the concrete is poured, it's acceptable to walk on it to help work the material into all the spaces evenly. Once the concrete is laid, use a 2x4 to screed off the rough top, creating a relatively flat surface. Follow this with a bull float to further level and smooth out any imperfections. Finally, apply a broom finish to the surface. This creates a textured, non-slip surface, which is important because wet concrete becomes very slippery.

Goal: Achieve a smooth, level concrete surface with appropriate texture for safety and appearance.

Tools and materials

  • 2x4 — Screeding off the rough top of the wet concrete
  • Bull Float — Leveling and smoothing out imperfections in the concrete surface
  • Concrete Broom — Applying a textured finish to the concrete for slip resistance
  • Rubber Boots — Protecting feet while walking on wet concrete
  • Wet Concrete — The main material for the driveway

What they say

Hide

project, it uses number four rebar 24 in on center suspended off the ground. Now, here's a pro tip. As you pour the wet concrete, it's okay to walk on it. That'll help get it worked into all of the spaces equally. Then use a 2x4 to get the rough top screed off and a bull float to level and smooth out any imperfections. Concrete gets very slippery when wet, so a broom finish adds just enough texture to keep it safe. So, now that your base is set and your driveway is poured, we're going to

Auto-generated from the video audio.