Engaging Clips and Securing Plywood Sheathing

What happens here

With the plywood panel brought into position, the workers carefully slide it down, allowing the edge of the new sheet to engage and interlock with the previously placed plywood clips. The clips guide the panel into proper alignment and maintain the required expansion gap. The panel is then lowered until it rests firmly on the roof trusses. Although not explicitly shown in detail, the sound of fastening (likely a nail gun) can be heard, indicating that the plywood is then securely attached to the trusses using nails or screws. The view from below shows the panel settling into its final position over the roof framing.

Goal: Securely install the plywood panel onto the roof framing using clips for alignment and support