Add Colorant (Paint) to Caulk

that down now I'm going to draw up my product my paint product now there's a lot of colorant added to this typically what you want to do is add 30 millimeter milliliters right here stay right there on the bottom I'd add a full syringe now if you're using a paint product that has a lot of color in it like your Reds dark greens and stuff the viscosity is going to be a little bit thinner so you probably want to add a little bit less product I'd recommend probably adding 25 milliliters if you've got a really thin product you can actually add stain to this and match stains or even a metallic finishes if you're going to be using a stain you're only going to be using uh 15 half 10 to 15 milliliters if you're using a stain because it's very very thin very very watery but we're using a paint I'm going to open up this paint and then we're going to add our product so we're going to be opening our product up with a letter Leatherman right here I do recommend you know as a professional painter or do it yourself or always carry around a five in one tool with you at all times a two-edged knife is amazing because it's a five in one and it has a knife at the same time where you can actually cut the top off so I got my paint now I'm going to simply just take my syringe make sure it's all the way down plungers all the way down and I'm going to withdraw 30 millimeters and I don't think this stuff is very thin it has a nice viscosity you know to it so I'm going to go ahead and add 30 milliliters so I'm just going to suck it up looks like it sucks up really simply and easily I got my paint withdrawn into my syringe now before you know taking and put your paint in your syringe make sure you mix your paint up really really good because otherwise you're gonna have resin sitting at the top and you're not going to get the full color you don't want to you want everything to be mixed up well so either shake it or actually Stir It Up Now I'm going to take my syringe I'm going to just add this to my product right here I can see you know I can see it's about right there so it's going to take off the product I'm going to fill that in don't like be light on this just to get it to the end right here I'm gonna Jam that in just like that now when I get the pumping I can just pump it make sure I got a nice tight seal and I just added my coloring just like that very simple and easy to do all