Skip to main content
Stesso

Configure Base and Add Shelves

1:02
1:33
4.9K views

At 1:02 in

Cabinet door transport! Cool stuff for cabinet door painters and large paint shops. #cooltools

Watch on YouTube

What happens here

The Pro Face Frame and Door Mover offers 'multiple configurations' to suit various needs. The 'base unit' can be configured either flat to the ground or 'tilted back 5 degrees' to provide ergonomic access or prevent doors from falling forward. Furthermore, you can enhance the mover with 'shelf units'. These shelves come in two parts: a '2/3 shelf' and a '1/3 shelf'. To install them, use the 'little drop hooks' located on the shelves, similar to how gondola shelving is installed in supermarkets, allowing them to hook in 'really easily' at different heights to accommodate various door sizes or types.

Goal: Adjust the mover's configuration for optimal door storage and access

Tools and materials

  • 1/3 Shelf Unit PaintLine — Adding an upper level for storing smaller doors or parts
  • 2/3 Shelf Unit PaintLine — Adding an upper level for storing smaller doors or parts
  • Drop Hooks — Securing shelf units to the mover's frame

What they say

Hide

>> So, multiple configurations like you can change this shelf. Um, I think >> yeah, the base unit is just is just without the shelf. It comes either flat to the ground like this or tilted back 5°. And then you have uh you can add the shelf unit. It comes with they in two parts. The shelf does a 2/3 shelf and then a 1/3. So, this has just the 2/3 attached to it. And the shelves hook in really easily. There's these little drop hooks, almost like gondola shelving at

Auto-generated from the video audio.