Skip to main content
Stesso

Install Center Support Strip

0:38
0:58
86.1K views

At 0:38 in

Build a portable job-site table 💪 #build #diy #carpentry

Watch on YouTube

What happens here

Install a horizontal wooden strip below the halfway mark on the underside of the tabletop. This strip will serve as a guide and support for the adjustable block in the next step. Use an impact driver and wood screws to secure this strip to the underside of the tabletop, spanning the distance between the two main leg-support frame pieces. The video shows this being installed slightly off-center, allowing for flexibility in the adjustable block's position.

Goal: Create a guide for the adjustable support block.

Tools and materials

  • Assembled Tabletop — The base for installing the support strip
  • Impact Driver DeWalt — Driving screws to attach the support strip
  • Wood Screws — Fastening the support strip
  • Wooden Strip — Serving as a guide and support for the adjustable block

What they say

Hide

Install your legs. Cut two more at 32 long and 35°. Measure 18 down and install your screw. Keep your leg a half inch away. Install strip below your halfway mark. Give her a flip. Install a block between the legs. Install block 19 inches back. This can be adjusted for height and pitch.

Auto-generated from the video audio.