Skip to main content
Stesso

Introduction and Raw Block Preparation

0:00
47:01
1.9M views

At 0:00 in

BluePrint Engines Factory Full Tour & Behind The Scenes: How Does a Crate Engine Get Made?

Watch on YouTube

What happens here

The video begins with an introduction to the Blueprint Engines facility, located in Kearney, Nebraska. It starts in the Research & Development (R&D) section where engines are tested on a dynamometer (dyno). The focus then shifts to the manufacturing floor, specifically to the raw engine blocks as they arrive from the foundry. The blocks are cast in the Midwest, USA. The initial process involves removing raised metal and excess material from the cast blocks, which are raw castings. This step is crucial to ensure that the blocks can be properly loaded into the machining centers without causing interference or misalignments.

Goal: Prepare raw engine block castings for machining.

Tools and materials

  • Dynamometer — Testing engines in the R&D department
  • Machining Centers — Removing excess material from castings
  • Raw Engine Blocks Blueprint Engines — The base component for engine manufacturing

What they say

Hide

we've switched rolls i'm gonna try to put this together [Applause] [Music] we'll have you put on safety glasses it's really deceptive how big this building is so we'll start talking about blocks so our blocks are made in the usa they're they're cast in the midwest they come to us we get them the only thing that's really done to them is when they come out of of the foundry there's some raised metal and stuff on there so they go through and remove those so when we load them inside of the machines it doesn't throw off the machining or make it so it can't be loaded from there each one of these machines performs a different function so if you

Auto-generated from the video audio.