Skip to main content

Tool Interior Caulk Bead

4:38
10:02
12.6K views

At 4:38 in

Best Caulking for Vinyl Windows. Tower Sealants AU-1 Sealer.

What happens here

Immediately after applying the caulk, wet your finger or a damp caulk sponge (moistened in warm water). Lightly press down on the fresh caulk bead and run your finger/sponge along its length to smooth it out. For corners, use gentle pressure to create a crisp, tight seal. The water-based nature of Tower Sealants AU1 allows for easy tooling, yielding a clean, smooth result. Avoid rushing this step to ensure a high-quality finish.

Goal: Smooth the applied interior caulk bead using a wet finger or a damp sponge to create a super smooth, professional finish, especially in corners.

Tools and materials

  • Bucket of Warm Water
  • Caulk Sponge

What they say

Hide

tube clean fill that gap you don't want to do too much caulking at once because if your caulking starts to dry it doesn't tool very well one of the other reasons why i like this tower au1 it tools amazing it's like butter so you can use it comes in big old huge sausage packs you can use it on concrete tilt-ups that's what it was designed for so the large gaps and concrete tilt-ups it's paintable so i'm gonna do two sides wet my finger just press down just enough where i can feel the caulking i'm pressing it down in getting a nice bead trying to keep as much off the vinyl window you want to use a a caulking like this is a construction grade sealant right here and you got these white vinyl windows you want to get a good seal on these windows you want to get a good bond because they're kind of they're a gloss vinyl and so if you buy an inexpensive caulking or a cheap caulking try to save money like that you're not going to get a good bond to your vinyl window and it will separate probably within a year or two so caulking just takes you just takes time you don't want to be in a hurry just pressing down slightly i'll just keep wetting my finger until i get my corner perfect the way i want it now i'll do the other two edges the inside is nice and tight so i'll have to use backer rod now if you could like with quad quad says you can't tool it you would just put it on just like that you'd have to be very particular very slow with your bead to get a nice bead it's going to stay kind of rounded full and kind of like bumpy kind of like a weld but with au1 i can go right over it tool it just like this with my finger and i don't use any type there's like little tools that you were sold that the tool caulking with but it never works as well is the good old-fashioned pattern your finger you see i just keep wetting my sponge over and over those corners i want my corners super smooth nice and tight you want to make sure you go slow enough that you're putting your caulking into that gap and i'm watching it come out of the end of the tube up into the crack i can see it filling [Music] after every window i'm just going to clean my caulking sponge so i keep a bucket of warm water it's got a bucket of warm water here so i don't want to get a lot of caulking built up on my sponge now go outside we'll caulk the outside of the window

Auto-generated from the video audio.