Leverage Color Fade Protection and Adjust Spray Pressure

7:17

11:54

13.5K views

At 7:17 in

Behr DynastyⓇ Exterior Paint Review

Watch on YouTube

What happens here

This section highlights Behr Dynasty's unique 10-year color fade protection warranty, a feature the presenter has rarely seen in other paints. He stresses the importance of using products with lifetime warranties for exterior projects to ensure long-lasting color. Additionally, he provides an application tip for spraying Behr Dynasty: due to the paint's apparently high solid and resin content, he found it beneficial to lower the pressure on his sprayer from a typical 2200 PSI to 1600 PSI. This reduction in pressure helped control overspray and improved the spray pattern for a better application, which is crucial for achieving a smooth, professional finish.

Goal: Utilize Behr Dynasty's 10-year color fade protection warranty and adjust sprayer pressure (lower than usual) to optimize application, especially due to its high solid content.

Tools and materials

Airless sprayer
Behr Dynasty paint

What they say

(1,492 characters)

Hide

control now when it comes to um exterior repaints I only use lifetime warranty products for my customers and clients be Dynasty has a lifetime warranty on the product a limited lifetime warranty but also this is the only paint I've ever seen that has a color fade protection warranty so this is a 10year color fade protection warranty and I'm super excited about that cuz no paint has ever covered color fade I've even seen lifetime warranty Paints in the past that have faded within 5 years now you have the um protection by bear to have color fade protection on a paint now they do have a palette of colors that has um that you got to choose from that have that color fate protection warranty but I think it's absolutely incredible um I love the warranty on the product once again always use products that have lifetime warranty and be Dynasty offers that so I noticed um you know be Dynasty um it seemed like it had a high solid content a high resin content and I had to change just a little bit about you know the spray application I did um turn down the pressure on my pump significantly typically I would be spraying around 2200 PSI I dropped it all the way down to um 1,600 PSI to spray to um control you know any dust any overspray and turning the pressure down helped control the overspray and um help the application process so I did notice that it typically um was running and spraying better you know um applying it when I ran my uh pressure significantly lower so the next that I

Auto-generated from the video audio.