Identify 'Tailing' in Airless Spray Pattern

one of the biggest problems is actually adjusting the pressure correctly to avoid cordage. So we're going to show you a little bit of what it looks like. Here's what you shouldn't do, what you shouldn't have when you start with too much. No, that's really not very nice. So if we leave it like this and paint a whole wall like this, we'll see it in the light, when you look at it from a low angle. We'll see excess paint on the sides. So here we're using a nozzle, a classic blue Graco nozzle, let's say. So, to get a proper spray, we'll have to increase the pressure. I think we're around 90 bar here, and we'll go up to 190 bar to get something decent. Otherwise, to