Skip to main content
Stesso

Utilize Head as Hold-Back for Final Tightening

0:40
1:01
17.1K views

At 0:40 in

Are These The Best Toilet Bolts Ever Made? @shurset903 #plumbing #plumbing #diy #plumber

Watch on YouTube

What happens here

Once the toilet is placed over the bolts and the final nuts are applied, the directional indicating head serves a dual purpose. Use a pair of pliers (or a wrench on the specific head design) to grip the head of the toilet bolt. This prevents the bolt from rotating while you apply the final torque to the nut below, ensuring a secure and stable connection without the bolt spinning in the flange.

Goal: Prevent bolt rotation during final nut tightening.

Tools and materials

  • Nut — For final tightening of the toilet
  • Open-end wrench Unspecified — To tighten the nut
  • Pliers — To grip the bolt head to prevent rotation
  • Toilet flange — To simulate the real installation environment for demonstration
  • Washer — To distribute pressure under the nut

What they say

Hide

so that this act has a nut before you put the toilet on. It will hold it in the flange, keep it from moving, and it actually will hold it in the flange. That head also serves as hold back when you're tightening your nut down, to keep that foot from turning, while you put that final torque on that nut and tighten that toilet down. You're about to head with your players, snap it off, and it's now at the installed height to put your toilet caps directly on top of it.

Auto-generated from the video audio.