Skip to main content
Stesso

Flash Patch Foam Injection and Curing

1:45
14:53
1M views

At 1:45 in

AMAZING New Tools and Inventions of 2019 That NO ONE has SEEN Before

Watch on YouTube

What happens here

Open the pre-mixed urethane solution and slowly inject it into the hole through the nozzle of the front disk. The foam will expand for about 20 minutes, filling the cavity and fusing to both the drywall and the backplate, creating a stronger finish than the original wall. Excess foam will come out the back, ensuring the cavity is fully filled. Once set, the front plastic piece can be removed, leaving a perfectly smooth surface that is harder than the original drywall, ready for painting or finishing without any sanding.

Goal: Fill the drywall hole with expanding foam and allow it to cure.

Tools and materials

  • Flash Patch Complete Drywall Repair Kit — Dispensing and applying the urethane foam for repair

What they say

Hide

adjust it lock it shut so this will continue to expand for 20 minutes to fill that hole right until it's completely flushed to the front all the excess you'll see start to come out the back it fuses the foam to the wall and the back plate so you get a stronger finish than what you started with alright guys I'm gonna take over explaining this process from here because the microphone on my camera didn't want to cooperate so what happens is it expands out the back of the wall and fuses that plate in place making a stronger bond after 20 minutes it sets up and then you can remove the front of that and it leaves it perfectly smooth with the existing finish you don't have to say on nothing you don't have to do anything everything is just done as soon as you take that clear plastic piece off the front she's rock solid harder than sheetrock was beforehand as far as I know this is not in stores yet but I actually learned about this from the guys at Lowe's so it may end up being in Lowe's and if I can find it on Amazon I will put a link to it there

Auto-generated from the video audio.