Prepare Fascia Board
0:00
0:28
2.2K views
At 0:00 in
A little pre planning goes a long way 😎
What happens here
The video begins by showing a worker preparing a long board, which appears to be a composite or treated wood fascia board, laid flat on the ground. Using a DeWalt cordless drill fitted with a drill bit, pilot holes are meticulously drilled at regular intervals along the entire length of the board. A speed square is utilized to accurately mark the positions for these holes, ensuring consistent spacing and a straight line. After the pilot holes are drilled, several long screws are partially inserted into these holes, protruding slightly, making them ready for quicker installation when the board is lifted into place.
Goal: Drill pilot holes and pre-set screws in the fascia board
Tools and materials
- Cordless Drill DeWalt — Drilling pilot holes and driving screws
- Drill Bit — Creating pilot holes in the fascia board
- Fascia Board — The main component being installed along the roof eave
- Long Screws — Securing the fascia board to the eave structure
- Speed Square — Marking positions for drilling pilot holes