Skip to main content

Nordtek Aluminum Dump Trailer Review

12:08
19:58
41.7K views

At 12:08 in

5 Trailers on Another Level

What happens here

The host reviews an aluminum dump trailer from Nordtek Aluminum Trailers with Nathan, a company representative. This large dump trailer features 4-foot sides and triple 7,000-pound axles (7K axles), indicating high capacity. The key innovation highlighted is the all-aluminum construction, including the floor which uses 4-inch aluminum tubing on 16-inch centers, fully welded, and a plate underneath for added rigidity. The host emphasizes that the aluminum construction allows for maximum payload while maintaining a light and durable trailer. Nathan confirms they are an 'aluminum only' manufacturer, with plants in Canada (Springfield) and one rolling out in Muncie, Indiana. The host correctly deduces the Canadian origin due to the prevalent use of aluminum and galvanized axles in that region, attributed to salt exposure. He praises the all-aluminum construction from the neck to the frame and galvanized axles for rust prevention.

Goal: Examine the benefits of all-aluminum construction in dump trailers for payload and durability.

Tools and materials

  • Aluminum Tubing — Used for the trailer's frame and floor construction
  • Galvanized Axles — Axles with a protective zinc coating for corrosion resistance
  • Nordtek Aluminum Dump Trailer Nordtek — The subject of the review, featuring all-aluminum construction

What they say

Hide

started? Yes, Nathan. Could you explain this trailer to me? This trailer is one of the largest aluminum trailers we own. It can load up to 4 feet high on the sides . It is equipped with a 7,000 axle . Three outlines? Triple Seven? Triple Seven? Well, this is the model where we previously used a scissor jack, and this is the first model equipped with a telescopic hoist. I mean a telescopic hoist. Could you explain the floor I am looking at? It looks like there are holes drilled in this floor at 16-inch intervals. A 4-inch tube and a 2- inch tube are welded to the bottom , and a plate is padded underneath to further increase rigidity . yes . I think this trailer seems to be designed to withstand the maximum load with the lightest possible structure. you're right. The reason I think that is simple. The Triple Seven tires and the all-aluminum body structure allow it to withstand maximum loads on the road . However, thanks to aluminum, it is lightweight and highly durable. That is, if I understand the trailer correctly. Yes, that is correct. If it were a steel trailer, it would be able to withstand at least several thousand pounds more . And that is a really big problem. However, this trailer is not recommended for transporting huge chunks of concrete. This is because, since it is made of aluminum, putting something like that in could damage the bottom . These trailers are designed to support weight. No, we can use plywood liners, and we also manufacture large commercial trailers . No, but using a liner reduces the ability to lighten . If you put on a liner, it will weigh much more . However, it is incomparably different from a steel trailer . Yes, that is correct. It can't even be compared to a steel trailer. And it's not like we're only transporting large chunks of concrete . you're right. There are various options, and if you need to transport large concrete, there are also steel trailers. Do you have steel trailers as well? We use only aluminum . Only aluminum. What is the company name? This is No Star. Everything from the neck down is made of aluminum. The frame? We don't make things like steel subframes . Galvanized axles? Yes, galvanized axles. Where is it made? We have three factories. We are building two locations in Canada, one in Springfield, and a new factory in Munsi, Indiana . I thought it was Canada. Do you know why? Why, you ask? Do you know the reason? Yes, aluminum is always made in Canada. There is a lot of salt there. Looking at the…

Auto-generated from the video audio.