Assembling the Side Frames with Cross-Braces
At 0:02 in
$3500 chair for $150 #MrBuildit #shorts #diy
What happens here
The video highlights the assembly process, showing the attachment of the decorative cross-braces. To begin constructing the chair's side frames, you will connect the vertical leg pieces with horizontal support rails that will form the armrests and seat base. Apply outdoor-grade wood glue to all mating surfaces before joining the pieces. Then, secure them with outdoor-grade screws. For a cleaner look, you might consider using pocket hole joinery. Ensure all joints are square and tight. Once the basic side frames are assembled, attach the decorative 'X' braces. These can be made from wood (as commonly seen) or metal. Position them correctly within the side frames and fasten them securely using screws. The video clearly shows a Ryobi cordless drill being used to drive these screws, emphasizing the need for appropriate fastening tools.
Goal: Construct two sturdy and visually appealing side frames for the armchair, incorporating decorative 'X' bracing.
Tools and materials
- Cordless Drill/Driver Ryobi — Drilling pilot holes and driving screws for assembly
- Countersink Bit Irwin — Creating a conical recess for screw heads to sit flush or below the surface
- Drill Bits DeWalt — Creating pilot holes for screws
- Measuring Tape — Verifying dimensions and placement of components
- Safety Glasses 3M — Protecting eyes from wood splinters and screw debris
- Square — Ensuring joints are at a perfect 90-degree angle
- Wood Clamps — Holding wooden pieces together tightly while glue dries and screws are inserted
- Outdoor-Grade Screws GRK — Securing the wooden components together
- Outdoor-Grade Wood Glue Titebond III — Strengthening the wood joints for a durable bond
- Pre-cut and Sanded Lumber Pieces N/A — The components for the chair's legs, armrest supports, and cross-brace pieces