Skip to main content

$15k fence has problems ๐Ÿ‘Ž Luckily the proper fix isnโ€™t too difficult ๐Ÿ‘ #fence #build #carpentry

0:33
43.1K views

Video by BAS Renovations

BAS Renovations

What happens here

This project addresses a common issue with vinyl fences where poor installation leads to significant gaps between fence panels and posts. The video describes a solution involving partial disassembly and careful re-alignment of the fence panels to ensure they sit flush against the posts, followed by securing them in place to eliminate rattling and improve aesthetics and structural integrity.

Transcript

Hide

Look at the massive gaps on this $15,000 fence. I can fit my hands in here and these problems go all the way down the fence line. The spacing's off, but the bigger thing is that this vinyl piece here is supposed to be against the post and it gets screwed. So, when the wind blows, it doesn't sit here and rattle and this doesn't come back and then you have these gaps down the entire fence line. To fix this, you likely have to start at the very end of the fence, push all the tops over so you can undo the tabs and then pull all these pickets out so you can push this against here and then screw it in.

Auto-generated from the video audio.