Apply First Coat of Paint — Prime and Paint
Part of project
Stair Skirt Boards and Trim Refresher · Step 10 of 10
In this video
With the trim primed and imperfections filled, it's time for the first coat of paint. Use a good quality 3-inch angled brush and apply the chosen paint color, in this case, 'Extra White' semi-gloss finish. Maintain long, even strokes, working from top to bottom. The video shows both the man and woman applying the paint, cutting in carefully around door and window frames, and along the baseboards.
16K subscribers
FAQs
Is this project truly beginner-friendly, and can it really be done in 3 days?
While listed as beginner, this project requires patience and precision, especially with measuring and angled cuts. A 3-day estimate is feasible if you dedicate full days to the work, but expect it to take longer if you're new to these techniques or have limited time each day. Proper preparation and dry fitting are key to saving time and frustration.
What are the most essential tools I'll need for this project, beyond basic hand tools?
A molding pry bar and nail puller are crucial for safely removing old trim without damaging the wall. A miter saw is highly recommended for accurate angled cuts on the new skirt boards and trim, especially for staircase stringers. Don't forget a reliable tape measure and a caulk gun for construction adhesives.
Why would I choose PVC trim boards over traditional wood for stair skirt boards and trim?
PVC trim boards, like the suggested Veranda PVC, offer excellent moisture resistance and durability, making them less prone to warping or rotting than wood. They are also easier to clean and don't require sealing before painting. However, they can be more expensive and require specific fasteners or adhesives in some cases.
What are common mistakes to avoid when measuring and cutting the new skirt boards for stair angles?
The most common mistake is inaccurate angle measurement, leading to gaps. Use an angle finder or create templates from cardboard for precise cuts, especially where the skirt board meets the stair treads and risers. Always measure twice and cut once, making test cuts on scrap material if unsure.
Apply First Coat of Paint — Prime and Paint
Part of project
Stair Skirt Boards and Trim Refresher · Step 10 of 10
In this video
With the trim primed and imperfections filled, it's time for the first coat of paint. Use a good quality 3-inch angled brush and apply the chosen paint color, in this case, 'Extra White' semi-gloss finish. Maintain long, even strokes, working from top to bottom. The video shows both the man and woman applying the paint, cutting in carefully around door and window frames, and along the baseboards.
Frequently Asked Questions
Is this project truly beginner-friendly, and can it really be done in 3 days?
While listed as beginner, this project requires patience and precision, especially with measuring and angled cuts. A 3-day estimate is feasible if you dedicate full days to the work, but expect it to take longer if you're new to these techniques or have limited time each day. Proper preparation and dry fitting are key to saving time and frustration.
What are the most essential tools I'll need for this project, beyond basic hand tools?
A molding pry bar and nail puller are crucial for safely removing old trim without damaging the wall. A miter saw is highly recommended for accurate angled cuts on the new skirt boards and trim, especially for staircase stringers. Don't forget a reliable tape measure and a caulk gun for construction adhesives.
Why would I choose PVC trim boards over traditional wood for stair skirt boards and trim?
PVC trim boards, like the suggested Veranda PVC, offer excellent moisture resistance and durability, making them less prone to warping or rotting than wood. They are also easier to clean and don't require sealing before painting. However, they can be more expensive and require specific fasteners or adhesives in some cases.
What are common mistakes to avoid when measuring and cutting the new skirt boards for stair angles?
The most common mistake is inaccurate angle measurement, leading to gaps. Use an angle finder or create templates from cardboard for precise cuts, especially where the skirt board meets the stair treads and risers. Always measure twice and cut once, making test cuts on scrap material if unsure.